











DIY Worktop Corner Brackets 1/4-20
Upgrade your custom worktop or workbench with versatile 1/4-20 mounting hardware and decorative protective bumpers! Watch Video To Learn More - Ultimate Mobile Workstation
Attach to MODbox, Packout, and BuildOut using these feet:
The Dimensions of these Corner Brackets are optimal for a 24in x 16in DIY Worktop made with ~1.5 inch thick material (using 2 ¾ inch edge glued boards or 2 ¾ inch pieces of plywood). The space between each corner bracket is wide enough for 1 Handler System Wall Mount on each side or 2 Handler Wall Mount on the front or Back.
Add Handler Wall Mounts - https://weihedesigns.com/shop/p/handler-5-cleat-wall-mount
Note: If you create a smaller than 24×16 worktop, the brackets should still work but Handler Wall Mounts may not fit between the Corner Brackets.
Installation:
Cut 1 inch 45 degree chamfers on edge of material
Mark Holes. Pre drill, and install corner bracket with 1 screw per side
Attach your own accessories with 1-4/20 hardware
The 1/4-20 threaded inserts are compatible with a growing line of WD accessories - starting with the Corner Anchor Point
Upgrade your custom worktop or workbench with versatile 1/4-20 mounting hardware and decorative protective bumpers! Watch Video To Learn More - Ultimate Mobile Workstation
Attach to MODbox, Packout, and BuildOut using these feet:
The Dimensions of these Corner Brackets are optimal for a 24in x 16in DIY Worktop made with ~1.5 inch thick material (using 2 ¾ inch edge glued boards or 2 ¾ inch pieces of plywood). The space between each corner bracket is wide enough for 1 Handler System Wall Mount on each side or 2 Handler Wall Mount on the front or Back.
Add Handler Wall Mounts - https://weihedesigns.com/shop/p/handler-5-cleat-wall-mount
Note: If you create a smaller than 24×16 worktop, the brackets should still work but Handler Wall Mounts may not fit between the Corner Brackets.
Installation:
Cut 1 inch 45 degree chamfers on edge of material
Mark Holes. Pre drill, and install corner bracket with 1 screw per side
Attach your own accessories with 1-4/20 hardware
The 1/4-20 threaded inserts are compatible with a growing line of WD accessories - starting with the Corner Anchor Point